81 research outputs found

    Fixed-Rate Transmission Over Fading Interference Channels Using Point-to-Point Gaussian Codes

    Get PDF
    This paper investigates transmission schemes for fixed-rate communications over a Rayleigh block-fading interference channel. There are two source-destination pairs where each source, in the presence of a short-term power constraint, intends to communicate with its dedicated destination at a fixed data rate. It encodes its messages using a point-to-point Gaussian codebook. The two users' transmissions can be conducted orthogonally or non-orthogonally. In the latter case, each destination performs either direct decoding by treating the interference as noise, or successive interference cancellation (SIC) to recover its desired message. For each scheme, we seek solutions of a power control problem to efficiently assign power to the sources such that the codewords can be successfully decoded at destinations. However, because of the random nature of fading, the power control problem for some channel realizations may not have any feasible solution and the transmission will be in outage. Thus, for each transmission scheme, we first compute a lower bound and an upper bound on the outage probability. Next, we use these results to find an outer bound and an inner bound on the \epsilon-outage achievable rate region, i.e., the rate region in which the outage probability is below a certain value \epsilon

    Secure Simultaneous Information and Power Transfer for Downlink Multi-User Massive MIMO

    Get PDF
    In this article, downlink secure transmission in simultaneous information and power transfer (SWIPT) system enabled with massive multiple-input multiple-output (MIMO) is studied. A base station (BS) with a large number of antennas transmits energy and information signals to its intended users, but these signals are also received by an active eavesdropper. The users and eavesdropper employ a power splitting technique to simultaneously decode information and harvest energy. Massive MIMO helps the BS to focus energy to the users and prevent information leakage to the eavesdropper. The harvested energy by each user is employed for decoding information and transmitting uplink pilot signals for channel estimation. It is assumed that the active eavesdropper also harvests energy in the downlink and then contributes during the uplink training phase. Achievable secrecy rate is considered as the performance criterion and a closed-form lower bound for it is derived. To provide secure transmission, the achievable secrecy rate is then maximized through an optimization problem with constraints on the minimum harvested energy by the user and the maximum harvested energy by the eavesdropper. Numerical results show the effectiveness of using massive MIMO in providing physical layer security in SWIPT systems and also show that our closed-form expressions for the secrecy rate are accurate

    Secure Simultaneous Information and Power Transfer for Downlink Multi-user Massive MIMO

    Get PDF
    In this paper, downlink secure transmission in simultaneous information and power transfer (SWIPT) system enabled with massive multiple-input multiple-output (MIMO) is studied. A base station (BS) with a large number of antennas transmits energy and information signals to its intended users, but these signals are also received by an active eavesdropper. The users and eavesdropper employ a power splitting technique to simultaneously decode information and harvest energy. Massive MIMO helps the BS to focus energy to the users and prevent information leakage to the eavesdropper. The harvested energy by each user is employed for decoding information and transmitting uplink pilot signals for channel estimation. It is assumed that the active eavesdropper also harvests energy in the downlink and then contributes during the uplink training phase. Achievable secrecy rate is considered as the performance criterion and a closed-form lower bound for it is derived. To provide secure transmission, the achievable secrecy rate is then maximized through an optimization problem with constraints on the minimum harvested energy by the user and the maximum harvested energy by the eavesdropper. Numerical results show the effectiveness of using massive MIMO in providing physical layer security in SWIPT systems and also show that our closed-form expressions for the secrecy rate are accurate

    Interference Alignment — Practical Challenges and Test-bed Implementation

    Get PDF
    Data traffic over wireless communication networks has experienced a tremendous growth in the last decade, and it is predicted to exponentially increase in the next decades. Enabling future wireless networks to fulfill this expectation is a challenging task both due to the scarcity of radio resources (e.g. spectrum and energy), and also the inherent characteristics of the wireless transmission medium. Wireless transmission is in general subject to two phenomena: fading and interference. The elegant interference alignment concept reveals that with proper transmission signalling design, different interference signals can in fact be aligned together, such that more radio resources can be assigned to the desired transmission. Although interference alignment can achieve a larger data rate compared to orthogonal transmission strategies, several challenges should be addressed to enable the deployment of this technique in future wireless networks For instance, to perform interference alignment, normally, global channel state information (CSI) is required to be perfectly known at all terminals. Clearly, acquiring such channel knowledge is a challenging problem in practice and proper channel training and channel state feedback techniques need to be deployed. In addition, since the channels are time-varying proper adaptive transmission is needed. This chapter review recent advances in practical aspects of interference alignment. It also presents recent test-bed implementations of signal processing algorithms for the realization of interference alignment.Comment: Book Chapter accepted for publication in the book entitled: Contemporary Issues in Wireless Communications, ISBN: 978-953-51-4101-3, Khatib, M. (Ed.), to be published by INTECH Publishers. Expected month of publication: November 201

    Comparative Outcomes of Pulpotomy in Mature Molars with Irreversible Pulpitis: A Non-Randomized Trial Evaluating Calcified and Non-Calcified Pulp Chambers

    Get PDF
    Introduction: This non-randomized clinical trial investigated the outcomes of full pulpotomy in adult molars with irreversible pulpitis, comparing those with calcified and non-calcified pulp chambers over 6 and 12 months. Materials and Methods: A total of 101 adult permanent molars with irreversible pulpitis, in individuals over 12 years old, were categorized based on pulp chamber calcification observed in radiographic images by two endodontists. Subsequently, full pulpotomy procedures were performed, achieving hemostasis, and applying a 2 mm layer of calcium-enriched mixture (CEM) cement as a pulp covering agent. After 48 hours, the setting of the CEM cement was verified, followed by the application of a layer of resin-modified glass-ionomer. The tooth was then restored using amalgam. Clinical and radiographic evaluations were conducted at 6-month and 1-year follow-ups by blinded endodontists. Success rates were compared using Fisher's exact test and logistic regression tests with a significance level of 0.05. Results: Among the 97 patients with 6-month and 1-year follow-ups, all achieved clinical success. Radiographic success rates were 99% at 6 months and 96.9% at 1 year, regardless of pulp calcification. In the 6-month follow-up, success rates were 98.07% for non-calcified pulp chambers and 100% for calcified pulp chambers. At the 1-year follow-up, success rates were 96.1% and 97.8%, respectively. Statistical analysis showed no significant difference in radiographic success rate between the two groups at both follow-ups (P>0.05). Conclusions: Full pulpotomy using CEM cement is a successful treatment for adult permanent teeth with calcified and non-calcified pulp chambers presenting signs and symptoms of irreversible pulpitis up to a 1-year follow-up. This study provides compelling evidence that vital pulp therapy can be effectively employed in the pulpotomy of calcified teeth, at least in the short term

    Interference alignment testbeds

    Get PDF
    Interference alignment has triggered high impact research in wireless communications since it was proposed nearly 10 years ago. However, the vast majority of research is centered on the theory of interference alignment and is hardly feasible in view of the existing state-of-the-art wireless technologies. Although several research groups have assessed the feasibility of interference alignment via testbed measurements in realistic environments, the experimental evaluation of interference alignment is still in its infancy since most of the experiments were limited to simpler scenarios and configurations. This article summarizes the practical limitations of experimentally evaluating interference alignment, provides an overview of the available interference alignment testbed implementations, including the costs, and highlights the imperatives for succeeding interference alignment testbed implementations. Finally, the article explores future research directions on the applications of interference alignment in the next generation wireless systems.Jacobo Fanjul's research has been supported by the Ministerio de Economía y Competitividad (MINECO) of Spain, under grants TEC2013-47141-C4-R (RACHEL project) and FPI grant BES-2014-069786. José A. García-Naya's research has been funded by the Xunta de Galicia (ED431C 2016–045, ED341D R2016/012, E0431 G/01), the Agencia Estatal de Investigación of Spain (TEC2013-47141-C4-1-R, TEC2015-69648-REOC, TEC2016-75067-C4-1-R), and ERDF funds of the EU (AEI/FEDER, UE). Hamed Farhadi's research has been funded by the Swedish Research Council (VR) under grant 2015–00500

    Treatment of a Maxillary Second Molar with One Buccal and Two Palatal Roots Confirmed with Cone-Beam Computed Tomography

    Get PDF
    Root canal configuration is an important subject in endodontic practice and dentists should be familiar with all possible types of root canal configuration. A forty-three year old male was referred for root canal treatment of his maxillary left second molar tooth with symptomatic irreversible pulpitis. Pre-operative radiographs showed a three rooted molar. However, after access cavity preparation two palatal and one buccal orifices were detected. The patient was informed of the unusual root canal anatomy and cone-beam computed tomography (CBCT) was ordered for precise evaluation of the anatomy. CBCT image confirmed the presence of one buccal and two palatal root canals; an exceptionally rare condition.Keywords: Cone-Beam Computed Tomography; Maxillary Second Molar; Palatal Roots; Root Anatom

    Global, regional, and national disability-adjusted life-years (DALYs) for 359 diseases and injuries and healthy life expectancy (HALE) for 195 countries and territories, 1990-2017: a systematic analysis for the Global Burden of Disease Study 2017.

    Get PDF
    How long one lives, how many years of life are spent in good and poor health, and how the population's state of health and leading causes of disability change over time all have implications for policy, planning, and provision of services. We comparatively assessed the patterns and trends of healthy life expectancy (HALE), which quantifies the number of years of life expected to be lived in good health, and the complementary measure of disability-adjusted life-years (DALYs), a composite measure of disease burden capturing both premature mortality and prevalence and severity of ill health, for 359 diseases and injuries for 195 countries and territories over the past 28 years. Methods We used data for age-specific mortality rates, years of life lost (YLLs) due to premature mortality, and years lived with disability (YLDs) from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2017 to calculate HALE and DALYs from 1990 to 2017. We calculated HALE using age-specific mortality rates and YLDs per capita for each location, age, sex, and year. We calculated DALYs for 359 causes as the sum of YLLs and YLDs. We assessed how observed HALE and DALYs differed by country and sex from expected trends based on Socio-demographic Index (SDI). We also analysed HALE by decomposing years of life gained into years spent in good health and in poor health, between 1990 and 2017, and extra years lived by females compared with males. Findings Globally, from 1990 to 2017, life expectancy at birth increased by 7·4 years (95% uncertainty interval 7·1-7·8), from 65·6 years (65·3-65·8) in 1990 to 73·0 years (72·7-73·3) in 2017. The increase in years of life varied from 5·1 years (5·0-5·3) in high SDI countries to 12·0 years (11·3-12·8) in low SDI countries. Of the additional years of life expected at birth, 26·3% (20·1-33·1) were expected to be spent in poor health in high SDI countries compared with 11·7% (8·8-15·1) in low-middle SDI countries. HALE at birth increased by 6·3 years (5·9-6·7), from 57·0 years (54·6-59·1) in 1990 to 63·3 years (60·5-65·7) in 2017. The increase varied from 3·8 years (3·4-4·1) in high SDI countries to 10·5 years (9·8-11·2) in low SDI countries. Even larger variations in HALE than these were observed between countries, ranging from 1·0 year (0·4-1·7) in Saint Vincent and the Grenadines (62·4 years [59·9-64·7] in 1990 to 63·5 years [60·9-65·8] in 2017) to 23·7 years (21·9-25·6) in Eritrea (30·7 years [28·9-32·2] in 1990 to 54·4 years [51·5-57·1] in 2017). In most countries, the increase in HALE was smaller than the increase in overall life expectancy, indicating more years lived in poor health. In 180 of 195 countries and territories, females were expected to live longer than males in 2017, with extra years lived varying from 1·4 years (0·6-2·3) in Algeria to 11·9 years (10·9-12·9) in Ukraine. Of the extra years gained, the proportion spent in poor health varied largely across countries, with less than 20% of additional years spent in poor health in Bosnia and Herzegovina, Burundi, and Slovakia, whereas in Bahrain all the extra years were spent in poor health. In 2017, the highest estimate of HALE at birth was in Singapore for both females (75·8 years [72·4-78·7]) and males (72·6 years [69·8-75·0]) and the lowest estimates were in Central African Republic (47·0 years [43·7-50·2] for females and 42·8 years [40·1-45·6] for males). Globally, in 2017, the five leading causes of DALYs were neonatal disorders, ischaemic heart disease, stroke, lower respiratory infections, and chronic obstructive pulmonary disease. Between 1990 and 2017, age-standardised DALY rates decreased by 41·3% (38·8-43·5) for communicable diseases and by 49·8% (47·9-51·6) for neonatal disorders. For non-communicable diseases, global DALYs increased by 40·1% (36·8-43·0), although age-standardised DALY rates decreased by 18·1% (16·0-20·2)

    Global, regional, and national incidence, prevalence, and years lived with disability for 354 diseases and injuries for 195 countries and territories, 1990-2017: a systematic analysis for the Global Burden of Disease Study 2017.

    Get PDF
    The Global Burden of Diseases, Injuries and Risk Factors 2017 includes a comprehensive assessment of incidence, prevalence, and years lived with disability (YLDs) for 354 causes in 195 countries and territories from 1990 to 2017. Previous GBD studies have shown how the decline of mortality rates from 1990 to 2016 has led to an increase in life expectancy, an ageing global population, and an expansion of the non-fatal burden of disease and injury. These studies have also shown how a substantial portion of the world's population experiences non-fatal health loss with considerable heterogeneity among different causes, locations, ages, and sexes. Ongoing objectives of the GBD study include increasing the level of estimation detail, improving analytical strategies, and increasing the amount of high-quality data. METHODS: We estimated incidence and prevalence for 354 diseases and injuries and 3484 sequelae. We used an updated and extensive body of literature studies, survey data, surveillance data, inpatient admission records, outpatient visit records, and health insurance claims, and additionally used results from cause of death models to inform estimates using a total of 68 781 data sources. Newly available clinical data from India, Iran, Japan, Jordan, Nepal, China, Brazil, Norway, and Italy were incorporated, as well as updated claims data from the USA and new claims data from Taiwan (province of China) and Singapore. We used DisMod-MR 2.1, a Bayesian meta-regression tool, as the main method of estimation, ensuring consistency between rates of incidence, prevalence, remission, and cause of death for each condition. YLDs were estimated as the product of a prevalence estimate and a disability weight for health states of each mutually exclusive sequela, adjusted for comorbidity. We updated the Socio-demographic Index (SDI), a summary development indicator of income per capita, years of schooling, and total fertility rate. Additionally, we calculated differences between male and female YLDs to identify divergent trends across sexes. GBD 2017 complies with the Guidelines for Accurate and Transparent Health Estimates Reporting
    corecore